LAB-IDR DATALOGGER Standard batteries

Use

Idroscan is a digital manometer controlled by a microprocessor. It is a practical and economical solution to perform measures of pressure and temperature while maintaining a good accuracy and reliability. The idroscan has set the DATALOGGER function which allows you to store up to 60,000 measurement points in regular time steps from 1s to 10 hours per point. The measurement system consists of an analog section particularly stable and an A /D converter with 16 bit resolution (65000 divisions). To increase the level of intattation of components has been used a mixed technology, traditional and SMT, that makes the indicator resistant to vibration and mechanical stress as well as ensuring the reliability of the circuit. 2 Internal batteries (size AAA 1.5V) provide a range of 1 year, thanks to the function of AUTO POWER OFF which occurs when there are no changes in the measure for a time of 30 minutes. The indicator has a setting menu which allows to choose the resolution and the digital filter according to the measurement to be calculated.
Back to digital pressure gauges list

Description

DATALOGGER Digital pressure gauge,
- accuracy 0,20%
- max storing frequency 1 x sec. Max pressure storing 60.000.
- ABS case, Protection degree IP65
- STANILESS STELL Pivot.
2 Batteries AAA 1,5V, autonomy 1 year
- pressure measurements unit (mbar, bar, kPa, Mpa, psi, kg/cm2, mHg, mmHg, mH2O e mH2O),
- Zero and peak (active in pressure and Vacuum)
- Temperature display

Using range

Working temperature 0 - 50° C (+32 +122° F)
Max overpressure 150%

Models

Scale --> Resolution
1, 2,5, 5 bar --> 0,001
10, 20, 50 bar --> 0,01
100, 250, 350, 500, 700 bar --> 0,1
1000, 1500, 2000 bar --> 1

Options

RS232C output - RS232C-USB adapter - Vaacum - External power - Calibration report - Carrying case - Software

Available sizes